Cleaning a laser jet printer? - laser printer cleaning
I have an HP Laser Jet 1000 and I get up and down when printing black spots. The printer works fine otherwise - has anyone knows how to clean this printer? How or where can I? Thank you all!
Tuesday, January 12, 2010
Laser Printer Cleaning Cleaning A Laser Jet Printer?
2 comments:
For cleaning, but I still can not solve the problem. If the toner, after they finished the printer? If so, you have a problem in the fuser, and no amount of cleaning to correct. When the ink is smudged, but not from the side, then you have a problem with the toner cartridge, you change the cartridge.
During the printing process could, media, toner and dust particles accumulate in the printer. Over time this can lead to problems such as build quality printer toner specks or spots. Here's how to correct and prevent these problems by cleaning the area of the ink cartridge, the media path of the printer, and (if necessary), the pickup roller.
Cleaning the area of the print cartridge
No need to frequently clean the area of the ink cartridge. However, in order to clean the area of improving the quality of printed documents.
WARNING: Unplug the power cord and wait for the printer to cool before cleaning the printer.
1.
Unplug the power cord from the printer and enables the printer to cool.
Open the toner door and remove the toner cartridge.
CAUTION: To avoid damage, do not expose the print cartridge light. Cover the print cartridge if necessary. Also, do not touch the black sponge transfer roller into the printer. These can then damage the printer.
3.
With a dry cloth, wipe any residue from the pressArea concept and the cavity of the cartridge.
4.
Replace the print cartridges and close the toner door.
5.
Plug the power cord into the printer.
Cleaning the printer paper path
When the toner stains or spots will appear on the printouts, use cleaning utility for HP LaserJet remove excess media and toner particles can accumulate to roll on and the fuser. Cleaning the media path might extend the life of the printer.
NOTE: to achieve the best results, use a sheet of transparency. If films are not available, the media quality used copiers (70 to 90 g/m2 or 18 to 24 pounds) with a smooth surface.
1.
Make sure that the printer is idle and the Ready light is on.
2.
Media in the Inbox.
3.
Click Start, point to Settings and click Printers. Click (In Windows XP, click Start, click Printers and Faxes.)
4.
In the Printers folder, click the HP LaserJet 1000 printer icon and select Properties.
5.
In Windows 98 and Millennium Edition (ME)Click the Properties tab of the printer and click the Settings tab. In Windows 2000 and Windows XP, click the Configuration tab.
6.
Go to page: cleaning, and then click Start.
The cleaning process takes about 2 minutes.
Cleaning the Pickup Roller
Clean the pickup roller rather than replacing it.
WARNING: Unplug the power cord and wait for the printer to cool before cleaning the printer.
1.
Unplug the power cord from the printer and enables the printer to cool.
2.
Open the toner door and remove the toner cartridge.
3.
Find the pickup roller.
4.
Release the tabs, the little white on each side of the pickup roller, and rotate the pickup roller to the front.
5.
Gently pull the pickup roller to remove.
6.
Dampen a lint-free cloth moistened with distilled water or isopropyl alcohol, and scrub the roller.
WARNING: Alcohol is flammable. Keep the alcohol and cloth away from open flames. Allow the alcohol Completeland before the end of the printer and plug the power cord.
7.
With a dry cloth and lint, then wipe the pickup roller to remove dirt.
8.
Replace the cleaning roller pickup roller pickup slot.
Note: Helping round and rectangular pegs on both sides, the position of the roller pick-up correctly.
9.
Turn up the pickup roller on the back of the printer until both sides snap into place.
10.
Reinstall the print cartridges and close the toner door.
11.
Connect the printer.
Post a Comment